亚洲日韩在线视频 国产_日本AV资源天堂网站_小草社区视频在线_亚洲欧洲中日韩手机在线
 

产品中心

多功能工具机

0.00
0.00
产品型号:
产品编号:
  


主要规格和技术参数 
车削
AT320
机身上最大工件回转直径
320mm
最大工件长度
750mm
刀架上最大回转直径
200mm
主轴通孔直径 
38mm
主轴孔莫氏锥度
NO.5
刀架最大横向行程
150mm
小刀架最大纵向行程 
100mm
加工公制螺纹种数
21
加工公制螺纹螺距 
0.45-6mm
加工英制螺纹种数
28
加工英制螺纹螺距
5-48 1/n"
主轴每转刀架的纵向进给量
0.01-1.5/r
主轴每转刀架的横向进给量
0.025-0.34/r
尾架套筒的最大移动量
80mm
尾架内孔莫氏锥度
NO.3
主轴转速级数
12
主轴转速范围
60-1600r/min
电机
1.1kw

钻铣削
AT320
最大钻孔直径
16mm
钻铣头箱绕立柱回转角度
360
主轴转速级数
4
主轴转速范围
260-2620r/min
主轴孔莫氏锥度
No.3 or R8
电机
0.37kw


其他
净重 
400kg
外形尺寸
1540*625*1750

Features 

◆ Compact,versatile combination machine. 
◆ Adjustable height drill/mill head increases capacity. 
◆ Large MT5 spindle bore. 
◆ Large distance between center on longitudinal. 
◆ Fine feed handle and clutch for precision milling. 
◆ Headstock provides two step of feeds. 
◆ Spindle is supported by high precision bearing. 
◆ Headstock is constantly oiled during operation. 
◆ T-slot cross slide. 
◆ Adjustable gibs for the slideway. 
◆ Power longitudinal & cross feed. 
◆ Gearbox gets left and right hand threads to cut. 
◆ High precision chuck. 
◆ Equipped with emergency stop button. 
◆ A reversion switch is included for added versatility. 
◆ Tailstock may be offset for turning taper. 
◆ with the added control rod, it is easier to handle. 


Gear drive power for lathe 
It has 12-garde spindle gearshift for cutting, large spindle holes and large chuck 


Threading Dial & Half Nut 
It can be realized power feed on longitudinal or crosswise. 
cut and chase threads like a master machinist. you can cut right and left-hand threads in metric and inch. with the added control rod, it is easier to handle. 


Bi-directional power-feed 
No stop to realized the functions of positive and negative on the lathe. leadscrew & crossfeed screw on both lathe and mill-yield finishes,highest quality work. 


Gear drive power for mill & drill-It has 4 gearshift for drilling and milling. the drilling and milling head can work with angle changed  ? 


Induction hardened, precision ground V-way bed 


Quick Changeover & Two separate motors 
Bigger mill clearance allows room for both lathe and mill setups without removing the lathe chuck. this machine is multi-purpose machine tool of bench type, it 
is mainly used to lathe,drill and mill. which controlled by two motor 


STANDARD ACCESSORIES 
1. 3-jaw chuck 
2. dead center 
3. allen wrench 
4. double open end wrench 
5. chuck wrench 
6. change gear 
7. drill chuck 
8. machine base 


SPECIAL ACCESSORIES 
1. turning tool set 
2. steady rest 
3. follow rest 
4. machine vice 
5. face mill cutter 
6. face plate 
7. back plate(φ160/φ200) 
8. four-jaw chuck(φ160/φ200) 
9. step block 
10. rolling center

产品详情:
亚洲日韩在线视频 国产_日本AV资源天堂网站_小草社区视频在线_亚洲欧洲中日韩手机在线